R & I Electronics SA

Go to content

Main menu

QDT-P series


                                                        MODEL QDT-P UNIVERSAL TIMER
THE MODEL QDT-P TIMER IS ACTUALLY TWO TIMERS HOUSED IN THE ONE CABINET: It offers single pushbutton selection of all ISSF and Service Pistol matches and it is  a fully programmable timer allowing pre-selection of face time, delay time and number of target facings. Capable of one or five target facings
The QDT-P is designed to give Clubs a universal timer to cover all current and any future matches.

.1 seconds to 9.9 seconds in .1 second increments by thumbwheel switches
(1) .1 seconds to 9.9 seconds in .1 second increments by thumbwheel switches.
(2) 1 second to 99 seconds in 1 second increments.
(3) 5 seconds to 495 seconds in 5 second increments.
Either single or five facings selectable by front panel switches.
Provides single push button selection of programmed sequences for: Rapid Fire, Centre Fire, Standard Pistol, Service Pistol and Black Powder. Target “face” and “unface” positions can be automatic or manually selected.
Quartz crystal time reference ensures extremely accurate timing and an inbuilt extra time of 25 milliseconds eliminates any possibility of “short” timing of target exposure and delay times. The timing accuracy is independent of mains voltage and frequency variations.
Any sequence can be started or cancelled from front panel push buttons or started remotely from a supplied extended cable with push button. Normally  supplied as 3 metres in length this can be extended upon request.
Security coded UHF wireless remote control is available as an option. A small hand piece similar to motor vehicle remote entry systems allows both start and cancel functions from within 50-60 metres of the timer location.  Individual security coding allows multiple timers to be used simultaneously on the one range without cross or external UHF radio interference.
Three front panel switches allow independent control of separate target banks on the same range. A fourth front panel target switch is available as an option. If multiple target banks are required to operate simultaneously, all can be controlled from just one of the three switches provided.
Timer input voltage 240 volts ac 50 hz. Target output voltage 240 volts 50 hz.
Timer input and target and target output voltage 12VDC (option 1 no charge)
Timer input 240VAC, output voltage 12 or 24Vdc or AC (option2)

Robust steel cabinet finished in charcoal powder coating with brushed anodized silver aluminium front panel with silk screened lettering and brushed chrome handles. Dimensions: Width 360 mm.  Height 110 mm.  Depth 240 mm.  

Back to content | Back to main menu